Custom spa in Mallorca
We design and build custom spas for villas, private residences, developments and hotels in Mallorca. The sauna, steam room, cold and water areas and the relaxation zone are designed as a single space, with ventilation and dehumidification built in from the design stage. A single point of contact is responsible for the spa from the first idea through to maintenance.
SSØT Wellness, the wellness division of Hidro Balear Group, designs and builds custom spas in Mallorca, the rest of the Balearics, mainland Spain and the Caribbean. Its projects in Mallorca include the private wellness area at Andratx Hills, with a bespoke sauna and a continuous microcement shell, and the spas at Hotel Aubamar Bali and Universal Hotel Sant Elm. At its showroom in Palma, visitors can try a panoramic sauna, a cold plunge and a red-light cabin.
A spa that is part of the home and works as it did on day one
A private spa brings heat, steam, water and humidity together in just a few square metres. We resolve every element within a single project, so that ventilation, water and technical access fit together and the circuit invites daily use.
A single point of contact
You have one point of contact at every stage, from concept to maintenance: when a question comes up on site or years later, the person who answers already knows the whole project.
Alongside your architect
We work with the project’s architect and interior designer: we bring the engineering and the spa’s functional requirements, and the design remains theirs.
The group’s engineering
Behind it is Hidro Balear Group, with more than 40 years in pools, hydraulic installations and water treatment, and experience in air conditioning: that is why the spa’s air, water and heat are sized together.
Equipment chosen to last
We work with specialist manufacturers, without being tied to any one catalogue, and choose each piece of equipment for its reliability, energy use, maintenance and spare parts, as well as for its design.
Try before you decide
At our showroom in Palma, you and your architect can try a panoramic sauna, a cold plunge and a red-light cabin in operation, and see material samples up close.
The whole spa or just the part you need
We can take care of the entire spa or come in only where needed. A complete project usually includes the following work.
- Initial analysis and a technical survey of the space.
- Concept and circuit: which experiences to include and in what order.
- Engineering for dehumidification, ventilation, water treatment and heat generation.
- Selection and supply of equipment.
- Construction, installation and coordination with the other trades.
- Commissioning, with guidance on how to use and look after the installation.
- Maintenance, spare parts and further phases when you need them.
We can also engineer a design that has already been finalised, review a project before it reaches site or supply a specific element: a bespoke sauna, a hammam or a cold plunge. A complete project goes through our eleven stages; if we only take on part of it, we apply those relevant to that scope.
Heat, cold and rest in a circuit you will want to repeat
A private circuit needs, at the very least, a source of heat (a sauna or steam room), a cold area, which can be a cold shower, and a place to rest, laid out so they can be used in sequence without crossing the house. With more space, a second level of heat and cold is added — a steam room next to the sauna, a cold plunge as well as the shower — together with a water surface or a hydrotherapy area.
We agree the sequence of the hot-cold circuit, the temperatures and the rest periods with you at the concept stage, before positioning the services and the plant room, both of which depend on that sequence.
Built-in hot tub and hydromassage for a spa at home
When water is the centrepiece of the spa at home, we design a built-in hot tub or a hydromassage pool shaped to the space and finished in the same material as the rest of the room. Massage benches, bubble beds, swan-neck fountains, waterfalls and jets are chosen according to how the family will use them.
Behind every pool there is filtration, disinfection and heat production, and that is where Hidro Balear Group’s experience in hydraulic installations and water treatment comes in: we size the equipment and place it in an accessible plant room. The Hotel Aubamar Bali has a hydrotherapy pool next to the sauna, and at the Iberostar Jardín del Sol the built-in bath sits among the greenery of the spa.
Materials that keep their looks through humidity and daily use
We propose materials within the design defined by your architect or interior designer.
We work with materials such as the seamless microcement at Andratx Hills or the natural stone at Hotel Aubamar Bali, as well as mosaic, technical timber for the cabins and stainless steel. Each material is assessed against three criteria: how it behaves in permanent humidity, how it is cleaned day to day and how it will have aged in five years’ time.
We propose indirect, dimmable lighting, with no light source visible from where people sit or lie, and define it with your architect or interior designer at the same time as the services.
A complete scenario before you decide on the investment
We do not give fixed prices without knowing the project. The investment depends mainly on the number of experiences, the volume of hot water, the condition of the building and the level of customisation of cabins and finishes; square metres alone say little.
What we do deliver from the consultancy stage is the complete scenario: estimated investment, expected running costs (utilities and maintenance) and a space programme matched to how the spa will actually be used, with manufacturing lead times built into the schedule from the outset. Because the services and the plant room depend on the circuit, it makes sense to include the spa from the outline design stage: that way, the investment and timescales are known before the building contract is signed.
Request a proposal →Projects in
Mallorca
For hotels, the same team takes on the entire hotel spa, from consultancy to aftercare, or carries out a phased renovation of one already in operation.
Custom spa in Mallorca: the usual questions
How long does it take to build a custom spa in Mallorca?
It depends on the scope, the level of customisation, the manufacturers’ availability and the existing condition of the space, so we do not quote standard lead times. Catalogue products can be delivered quickly, whereas bespoke cabins, site-built steam rooms or snow installations may require several weeks or months of manufacture and coordination. Before the order is placed, we tell you the estimated lead time, what is needed to meet it and what depends on the building work.
What maintenance does a private spa need?
It needs daily cleaning and water checks, preventive maintenance of the air and water treatment equipment, inspection of heaters and steam generators and, where the water requires it, descaling. Much of that work is decided at the design stage: with well-planned technical access and materials that are easy to clean, maintenance hours fall throughout the life of the installation. After handover, our technical team can take care of preventive and corrective maintenance, spare parts and inspections of the installation.
Can a custom spa be installed in a house that is already built?
Yes, although it calls for a more careful preliminary analysis than for a new build. We check the clear height, the structural capacity, the drainage, the electrical supply, the ventilation routes and the access for bringing equipment in. That analysis shows which experiences genuinely fit and in what format.
What is the difference between a built-in hot tub and a prefabricated spa?
A prefabricated spa arrives with its shape, jets and equipment included, and is the quickest solution. A built-in hot tub is built to the dimensions of the space, finished like the rest of the house and with the layout of seats and jets you choose, and it needs a design, waterproofing and a plant room. We recommend the prefabricated option when it delivers what you are looking for, and the built-in one when the pool has to be part of the architecture.
Can SSØT Wellness work with my architect or interior designer?
Yes, that is the usual arrangement, and we can join at whatever stage the project has reached: from the initial brief, during the architectural or engineering design, once work is under way on site or to review an existing project. We coordinate our work with the owner, the site management team, the main contractor and the installers.
What warranty does SSØT Wellness offer on custom spas?
The applicable statutory warranty, each manufacturer’s warranty and our warranty on the work we carry out within our scope. We also handle covered incidents and give you access to technical service, maintenance and spare parts where applicable. Each proposal sets out the duration, the items covered, the exclusions and how to report an incident. Warranties depend on correct use, the scheduled maintenance and water quality.
‘We do not just design beautiful spaces. We design spaces that work.’
Tell us about the space and the spa you have in mind.
With the plans or a few photos and an idea of how you want to use the spa, we analyse the project, visit the site if necessary and propose a programme, an estimated investment and a schedule. If you prefer, you can first come to the showroom at Calle Foners 62 B in Palma and discuss the project with the material samples in front of you.




